
Landlords and managing agents often need more information about electricity consumption than a building’s main meter can provide.
A commercial property may contain several tenants, communal areas, plant rooms and shared building services behind one incoming electricity supply.
The main electricity meter provides the total amount used by the supply it serves, but it may not show how that electricity is distributed across individual parts of the property.
Electric sub meters provide additional measurement within the building.
They can be used to record electricity consumption for defined areas or loads, helping landlords, managing agents and facilities teams build a clearer picture of where electricity is being used.
The purpose is not simply to install more meters.
The aim is to collect useful information that supports the way the property is managed.
Why might a landlord need electric sub meters?
A landlord may be responsible for a property containing several separate occupiers.
The same building may also contain electricity consumption associated with:
- communal lighting
- lifts
- heating and cooling equipment
- plant rooms
- reception areas
- shared facilities
- external lighting
- other central building services
If all of this consumption sits behind the same main electricity meter, the property team may have limited information about how the total is divided.
Electric sub meters can provide additional measurements at selected points.
This can help the landlord or managing agent understand how electricity is distributed across the property.
For a commercial overview of this type of system, see Elcomponent’s electrical sub metering systems page.
What areas can landlords measure separately?
The available measurement points depend on the electrical distribution within the building.
Tenant areas
Where individual occupied areas have suitable electrical distribution, separate measurement can provide consumption information for each space.
This can help a landlord or managing agent understand how much electricity is being used within defined parts of the building.
Individual floors
A floor may be monitored separately where the building’s electrical system allows it.
This can be useful in multi-storey commercial properties where facilities or property teams want to compare consumption between levels.
Communal spaces
Shared areas can be measured to help property teams understand electricity use that is not directly associated with one tenant.
This may include receptions, corridors, shared lighting or other common areas.
Plant and building services
Major plant and services may also be monitored separately where the information is useful.
This can help facilities teams investigate how central building systems contribute to overall electricity use.
Separate buildings
On larger estates, different buildings may each have their own submetering arrangements.
This can help property teams review electricity use across a wider portfolio rather than relying only on whole-estate totals.
Not every possible area needs its own meter.
The better approach is to establish which measurements will help the landlord or managing agent answer practical property-management questions.
How can submetering support property management?
More detailed electricity data can help property teams move beyond a single building total.
For example, if electricity consumption rises significantly, the main meter may identify that a change has occurred.
It may not show where.
Separate meters can provide additional information that helps narrow down the area that needs investigation.
This can support tasks such as:
- comparing different parts of the property
- identifying changes in consumption
- reviewing communal electricity use
- maintaining clearer energy records
- supporting property reporting
- investigating usage outside expected operating periods
The data provides evidence.
The property team still needs to investigate why the consumption occurred and decide whether any action is required.
Electric sub meters for multi-let commercial properties
Multi-let properties can create particular metering requirements because several occupied areas may share wider building infrastructure.
A managing agent may need to distinguish between electricity associated with individual occupied spaces and electricity used by communal services.
Submetering can help provide this distinction where the electrical distribution allows it.
For example, individual tenant areas may have separate measurement while central plant is monitored independently.
This can produce a more useful view of the building than a single incoming meter.
The exact arrangement should be based on how the property is configured and how the data needs to be used.
Can electric sub meters support cost allocation?
Separate consumption measurements can support cost allocation where appropriate.
However, cost allocation and formal tenant billing should not automatically be treated as the same thing.
If electricity readings are going to be used for billing tenants, the metering and billing requirements need to be considered specifically.
A meter that is useful for energy monitoring is not automatically suitable for every billing arrangement.
Elcomponent includes tenant billing separately within its commercial energy management services.
If billing is the main objective, it should be considered from the start of the project rather than added later.
What about communal electricity consumption?
Communal consumption can represent a meaningful part of the electricity used within a commercial property.
Depending on the building, it may include lighting, lifts, reception spaces, mechanical services or other shared systems.
Without separate measurement, this electricity can be difficult to distinguish from tenant consumption.
Submetering can provide clearer information about selected communal loads.
This may help managing agents understand how shared services contribute to overall property consumption and identify areas that need further investigation.
The exact points worth measuring depend on the building.
A large office block, retail property and mixed commercial estate will not have identical requirements.
Should landlords review existing meters first?
Yes.
Established commercial buildings often already contain meters.
They may have been installed by previous owners, previous tenants, contractors or during earlier refurbishment projects.
Some may still provide useful information.
Others may no longer match the way the building is currently occupied.
Before adding new meters, it is sensible to understand what is already in place.
A review can establish:
- where the meters are located
- what each meter measures
- whether the meter is operating
- whether it still corresponds with the current property layout
- whether it can communicate readings
- whether the existing setup provides enough detail
This can help prevent unnecessary duplication.
Elcomponent’s energy monitoring services include site surveys, system design, commissioning and system management for organisations reviewing existing metering arrangements.
Manual meter readings or automatic collection?
A small property containing only a few meters may be manageable using manual readings.
As the number of meters increases, the process becomes more difficult.
A managing agent responsible for several floors, tenants or buildings may need to collect a significant number of readings.
Automatic meter reading can help by collecting compatible meter data without requiring someone to visit every meter routinely.
This can provide a more consistent record and make regular analysis more practical.
For properties requiring wider monitoring, Elcomponent’s energy monitoring systems combine metering, data collection and monitoring software.
Can landlords monitor several properties from one system?
Where the appropriate metering and data collection systems are in place, readings from several properties can be brought together.
This can be useful for managing agents and landlords responsible for a wider estate.
Instead of relying on separate meter-reading processes for every property, a central monitoring platform can provide a common place to review consumption.
This can help teams compare buildings, identify changes and focus attention on properties requiring further investigation.
Elcomponent’s MW2 energy monitoring software supports monitoring across one or multiple locations where the required metering and communications infrastructure is available.
What is the difference between a smart meter and a landlord’s sub meter?
The two serve different purposes.
A supplier smart meter is associated with the property’s energy supply and account.
A landlord’s sub meter provides additional measurement behind that main supply.
For example, the main smart meter may record total electricity consumption for the building.
Internal electric sub meters may then measure individual tenant areas, floors or communal services.
A commercial property can therefore have both a smart meter and a separate submetering system.
For current government information, see the Department for Energy Security and Net Zero’s non-domestic smart metering guidance.
Why is meter documentation important for landlords?
Commercial properties change.
Tenants move.
Spaces are divided or combined.
Building services are replaced.
If the metering records are not updated, it can become difficult to know what each meter represents.
Good documentation should make it possible to identify each meter, where it is located and what it measures.
This is particularly important for managing agents who may inherit responsibility for an existing building.
Elcomponent’s sub metering system documentation guidance explains how clear meter records can support ongoing system management.
A commercial property example
Elcomponent has worked on commercial property projects where detailed metering and central monitoring were used across multiple buildings and utility types.
The relevant point for landlords is that measurement creates the information needed to investigate property performance.
The outcome depends on how that information is used.
For an example, see Elcomponent’s commercial property submetering case study.
What should landlords decide before adding electric sub meters?
Start with the information you need.
Ask:
- Which areas need separate measurement?
- What decisions will the readings support?
- Are there existing meters that can already provide the data?
- How often will readings be required?
- Will readings be collected manually or automatically?
- Does tenant billing form part of the requirement?
- Who will review the resulting information?
Answering these questions gives the metering project a clear purpose.
The individual meter specification can then follow.
How many electric sub meters does a landlord need?
There is no standard number.
The answer depends on the property layout, electrical distribution and the level of information required.
One building may only need a handful of additional measurements.
A larger multi-let estate may require substantially more.
Installing additional meters should therefore be based on useful measurement points rather than a target number.
This approach makes it more likely that the resulting data will support real property-management tasks.
Building a clearer picture of electricity consumption
Electric sub meters can give landlords and managing agents more information about what is happening behind the main electricity supply.
They can separate selected tenant areas, communal spaces, plant and other electrical loads where the building’s distribution allows it.
When the data is collected consistently, it can support reporting, investigation and property management.
The most useful system is one designed around the information the organisation genuinely needs.
Discuss your metering project
If you manage a commercial property or estate and need clearer electricity data across tenant areas, communal spaces or building services, Elcomponent can help review the requirement.